Peugeot 207 Technical Questions/Problems

English-speaking 207 fans are welcome in our forums !

Modérateur: Team Féline 207

Peugeot 207 Technical Questions/Problems

Messagepar FELS » 20 Août 2007, 16:19

Hi guys,

Been driving my 207 for coming to 3 months. Now at 9000Km already.
However, during this 9000Km of drive, the engine cut off 5 times before.

RPM will drop automatically. When I turn the ignition key, the engine can crank, can start but cannot idle. The RPM will go back to 800rpm and drop back to 0 again. Cannot re-operate again unless I switch off the whole vehicle and on it again.

I suspect it's a throttle positioning fault. Any of you here have this problem too?
FELS
Nouveau
 
Messages: 31
Enregistré le: 13 Juillet 2007, 17:10


Messagepar tiger » 20 Août 2007, 17:26

hello
is your engine a VTI ? Some of these can stall sometimes.
avant : 207 3p sport pack 110ch gris manitoba
maintenant : 207 CC RG VTI120ch gris ermitage
Avatar de l’utilisateur
tiger
Floodeur acharné
Floodeur acharné
 
Messages: 7639
Enregistré le: 11 Janvier 2007, 15:04
Localisation: bruxelles

Messagepar FELS » 21 Août 2007, 05:10

Hi kindly please explain what's VTi? My engine is the joint venture with PSA & BMW 120bhp. Please kindly enlighten me on the engine model numbers. I'm quite confused.
FELS
Nouveau
 
Messages: 31
Enregistré le: 13 Juillet 2007, 17:10

Messagepar Zegou » 21 Août 2007, 08:48

Vti=120bhp
THP=150bhp

;)
Zegou
Flood Addict
Flood Addict
 
Messages: 14670
Enregistré le: 24 Août 2006, 08:58

Messagepar tiger » 21 Août 2007, 10:21

FELS a écrit:Hi kindly please explain what's VTi? My engine is the joint venture with PSA & BMW 120bhp. Please kindly enlighten me on the engine model numbers. I'm quite confused.

It's the VTI 120 bhp ;) . It replaced the old 110 bhp.

I don't know if it's the same problem, but we talked about a similar problem here ( in french sorry) :
http://www.feline207.net/forum/viewtopi ... sc&start=0

Try to see your garage to update the calculator of the engine.
avant : 207 3p sport pack 110ch gris manitoba
maintenant : 207 CC RG VTI120ch gris ermitage
Avatar de l’utilisateur
tiger
Floodeur acharné
Floodeur acharné
 
Messages: 7639
Enregistré le: 11 Janvier 2007, 15:04
Localisation: bruxelles

Messagepar Marc » 26 Août 2007, 19:20

calculator = engine control unit... ;)
207 Platinum THP ° Bleu Montebello ° 5 portes ° TVP ° Cuir / tissu noir ° Navigation RT3 couleur ° JBL ° Ch. 5CD ° RP alu
Membre des Montebello Boys
:star:
Avatar de l’utilisateur
Marc
Lionceau
Lionceau
 
Messages: 1415
Enregistré le: 17 Mars 2007, 12:56
Localisation: Stuttgart

Messagepar FELS » 27 Août 2007, 17:01

Marc a écrit:calculator = engine control unit... ;)


Hi thanks. I went to the local agent and the service advisor tried to tune the fuel+air mixture ratio to suit local climate. Not sure how true is it. But they don't allow customers to see them do the job. Up till now about few hundred km, my engine has not shown any problems yet.

Although my car feels more 'powerful' after the session, but nothing is confirmed unless my car goes for dyno.
FELS
Nouveau
 
Messages: 31
Enregistré le: 13 Juillet 2007, 17:10

Messagepar FELS » 29 Décembre 2007, 14:48

Hello all,

I need to change spark plugs.

I emailed Bosch and Checked TECDOC and found the following

BOSCH Part Nr: 5960A5
Socket Size 14mm
M12x1.25
Length 26.5mm
Tightening torque 20Nm

I'd like to check above from this what else can I try? I tried to located the above spark plug all over Singapore but in vain. So I may have to settle for an alternative.

I am driving the 207 VTI120 (120bhp) EP6 engine.
Peugeot is the brand to trust for life.
FELS
Nouveau
 
Messages: 31
Enregistré le: 13 Juillet 2007, 17:10

Messagepar Marc » 30 Décembre 2007, 13:40

eh? Why do you "need" to change the plugs?
Are they defective already? :?
207 Platinum THP ° Bleu Montebello ° 5 portes ° TVP ° Cuir / tissu noir ° Navigation RT3 couleur ° JBL ° Ch. 5CD ° RP alu
Membre des Montebello Boys
:star:
Avatar de l’utilisateur
Marc
Lionceau
Lionceau
 
Messages: 1415
Enregistré le: 17 Mars 2007, 12:56
Localisation: Stuttgart

Messagepar FELS » 30 Décembre 2007, 17:44

Marc a écrit:eh? Why do you "need" to change the plugs?
Are they defective already? :?


They are still working fine. I was a mechanic and so I always make it a point to replace my wear and tear parts before they are defective. Spark plugs are recommended to replace every 20000km. I don't like to wait for things to happen before I start doing things about it. So wherever it's financially sensible, I will go for proper maintenance.

I found the the OE in my car is
BERU Spark Plug Ultra
Code: Z233
Type: 12ZR-6 SP03
Order No: 0 002 240 902
Electrode gap: 1mm
Spark plug 1 Earthed Electrode
Spanner size 14mm
Thread: M12x1.25
Thread Length: 26.5mm
Torque: 20Nm
Peugeot is the brand to trust for life.
FELS
Nouveau
 
Messages: 31
Enregistré le: 13 Juillet 2007, 17:10

Messagepar Marc » 30 Décembre 2007, 18:01

ah, ok, not Bosch then ;)

Any luck finding the Beru in your country?
207 Platinum THP ° Bleu Montebello ° 5 portes ° TVP ° Cuir / tissu noir ° Navigation RT3 couleur ° JBL ° Ch. 5CD ° RP alu
Membre des Montebello Boys
:star:
Avatar de l’utilisateur
Marc
Lionceau
Lionceau
 
Messages: 1415
Enregistré le: 17 Mars 2007, 12:56
Localisation: Stuttgart

Messagepar FELS » 31 Décembre 2007, 04:58

Marc a écrit:ah, ok, not Bosch then ;)

Any luck finding the Beru in your country?


I called up the workshop and was informed that I will have the plugs and air con filter today.

Did some of my own minor maintenance myself. The remaining 2 air con filter and spark plugs due to no stock have to do it today. But took out my air con filter and checked. Replacement is required. Spark plugs have served 20000km. Was quite pissed. I took out my spark plugs and waited half a day for the plug to arrive but the wrong one came instead. So fitted everything back and waiting for today.
I also changed engine oil+oil filter, replaced front brake pads, serviced air filter and topped up coolant.

all are very easy. You can do it yourself too. But engine oil replacement need to hoist up the car for you to slide in to drain the engine oil.
Peugeot is the brand to trust for life.
FELS
Nouveau
 
Messages: 31
Enregistré le: 13 Juillet 2007, 17:10

Messagepar FELS » 31 Décembre 2007, 10:23

Just replaced the spark plugs and air con filter myself.

2 pieces of air con filter in one package.

5960A5 is the BERU spark plug number.
Peugeot is the brand to trust for life.
FELS
Nouveau
 
Messages: 31
Enregistré le: 13 Juillet 2007, 17:10

Messagepar Marc » 31 Décembre 2007, 11:50

Great. Do you feel a difference with the new plugs or is it not really noticeable?
207 Platinum THP ° Bleu Montebello ° 5 portes ° TVP ° Cuir / tissu noir ° Navigation RT3 couleur ° JBL ° Ch. 5CD ° RP alu
Membre des Montebello Boys
:star:
Avatar de l’utilisateur
Marc
Lionceau
Lionceau
 
Messages: 1415
Enregistré le: 17 Mars 2007, 12:56
Localisation: Stuttgart

Messagepar FELS » 31 Décembre 2007, 16:09

Marc a écrit:Great. Do you feel a difference with the new plugs or is it not really noticeable?


there's no noticable difference in power. But of course, I must put my car on a dyno before I can say there is really no differece. But my air con cools down faster than the past with a brand new air con filter.
Peugeot is the brand to trust for life.
FELS
Nouveau
 
Messages: 31
Enregistré le: 13 Juillet 2007, 17:10

Messagepar Marc » 31 Décembre 2007, 16:26

Hehe :D
at least one good thing :dance:

Good driving :drive:
207 Platinum THP ° Bleu Montebello ° 5 portes ° TVP ° Cuir / tissu noir ° Navigation RT3 couleur ° JBL ° Ch. 5CD ° RP alu
Membre des Montebello Boys
:star:
Avatar de l’utilisateur
Marc
Lionceau
Lionceau
 
Messages: 1415
Enregistré le: 17 Mars 2007, 12:56
Localisation: Stuttgart

Messagepar FELS » 31 Décembre 2007, 17:01

Marc a écrit:Hehe :D
at least one good thing :dance:

Good driving :drive:


yeah man, spent above S$400 which is about EU200 to do the servicing.
Bought 2 tins of OWS engine oil+ oil filter
4 front brake pads from TRW to replace my worn left caliper (pistonside) pad. The fast wear due to probably my ESP engagement as I make a lot of right turns up my multistorey car park. The TRW I changed into is organic pads. No need to sacrifice noise, comfort for high temperature resistant sintered pads.
I also serviced my engine air filter, replaced spark plugs, replaced air con filter. The drive is more or less the same but I dun like to wait for things to happen before I start doing something about it.

But overall, Peugeots are easy to maintain.
Peugeot is the brand to trust for life.
FELS
Nouveau
 
Messages: 31
Enregistré le: 13 Juillet 2007, 17:10

Messagepar FELS » 26 Janvier 2008, 20:46

Today I did my mini maintenance on the car during my car wash session.

Attached are the photos of some of the mini maintenance before the wash. I apologise for my lousy camera in advance.

Image
Removal of the wheel mounting bolt cap with the special tool provided with the car.

Image
Loosen the wheel mounting bolts first. So that it can be removed with ease by tool.

Image
Jack up the car at the designated location on the car chassis.

Image
Unscrew out the mounting bolts and take out the wheel.

Image
You will see the Macpherson strut and brake assembly.

Image

Image
Untighten the brake caliper mounting bolt with size 13mm ring or socket.

Image
Open up the brake caliper.

Image
Take out the brake pads.

Image
The caliper piston.
Brake calipers will normally be very dirty and a lot of brake dust contributes to squealing brakes. Clean with a wet cloth.

Image
Beware do not hit or damage the tie rod end which is very close to the brake assembly. A damaged tie rod can lead to failed steering.

Image

Image
Wash rims at the same time.
The OE rims of the Peugeot 207 is from BBS.

Image
Install the wheels back with a torque wrench. Torque = 100Nm (tightening torque supplied by the local Peugeot agent)

Image
Remove the rear wheel. Didn't open up the rear caliper as I don't have the tools for it.
It's my philosophy that if I don't have the right tool, I will not work.

Clean the brake disc with normal soap and water and rotate it as this is only a trailing axle to clean all the parts of the brake disc and caliper.

Image
This is how it looks like under the bonnet.

Image
The air box. I didn't bring torx allen keys with me so I cannot take it out. But the air filter inside is drop in and easily replaceable.

Image
The air con filter compartment.

Image
The air con fiter. There are altogether 2 pieces of filters. One bigger than the other. Don't be fooled that there's only 1. Replace both when it is too dirty.

Image
After an almost 4 hour session with my car.

I also topped up coolant and checked my wiper water reservoir. I will upload more pics next time on my next session of DIY on my car.

I also cleaned and serviced my wiper blades. But I shall not post the pics or share due to tactical reasons. But interested parties can always PM me.
Peugeot is the brand to trust for life.
FELS
Nouveau
 
Messages: 31
Enregistré le: 13 Juillet 2007, 17:10

Messagepar beowulf » 03 Septembre 2008, 15:35

Interesting, thanks for sharing. :ok:
Je suis portugais et ne rien écrire en français très bien, désolé. Seulement Anglais / portugais est meilleur.
[207 RC Black Sport Pack] - http://www.feline207.net/forum/viewtopic.php?p=745818
beowulf
Petit Félin
 
Messages: 55
Enregistré le: 03 Mai 2008, 21:08
Localisation: Lisbon, Portugal,Europe


Retourner vers The English 207 board !

Qui est en ligne

Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 1 invité